Reasons for Change

The original design of the AUX1 and AUX2 analog audio interfaces at the bottom of the RM702A/RM702C microphone was intended to:

  1. Support analog audio input and output, but it was found during usage that customers often needed further clarification on the interfaces and wiring.
  1. To reduce confusion regarding the analog audio interfaces at the bottom of the RM702A/RM702C microphone, only the labeling of the bottom shell interface names has been changed, while the product functionality remains unchanged.

Changes Made

  1. The original interface silk screen name "AUX1" is now changed to "SPKOUT", serving as the audio output interface (for playing remote audio), to output audio signals received from remote sources to local speakers for playback.
  1. The original interface silk screen name "AUX2" is now changed to "AECOUT", serving as the audio output interface to output locally captured microphone sound to terminals or recording hosts.

Illustration before the silk screen change:

 

Illustration after the silk screen change:

 

Additional Note

Product labeling changes will begin in April. For any questions or needs regarding these changes, we'll communicate individually. Our goal is to promptly address any issues customers encounter. We apologize for any inconvenience.

Leave a comment

Please note, comments need to be approved before they are published.

This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.

Latest Stories

This section doesn’t currently include any content. Add content to this section using the sidebar.